Panasonic GD53, GD67, GD68, GD92, GD93, GD95, GD87, GD87e, GD88, GU87 cell phones cable connector pinout
1 ADND -?-
5 TEST -?-
7 RX <--
8 TX -->
13 Vcharge -?- +5V?
14 GND
Panasonic P341i, X11, X70, X80, X88 cell phone pinout
2 Vcharge +5V?
12 Tx
13 Rx
1,14 Gnd
Panasonic G400-600 cell phones cable connector pinout
16 GND --- Ground
15 TX_Audio ?
14 AGND --- Audio_Ground
13 HF_ON (L=ON) L=H/F ON
12 AOP_Sense Data Adaptor Select
11 Serial_Up Rx UART up (9600,33.8kbps)
10 Serial_Down Tx UART down
9 External_Power POWER FOR CHARGING
8 Ground
7 RX_Audio
6 Radio_Mute L=MUTE
5 HF_Sense L=H/F MODE
4 Reserved L=FLASH WRITE ENABLE
3 Ignition H=ON
2 Logic_Power H=HANDSET ON
1 PAON Power Amplifier Control Signal
Panasonic G50, G51, G70, A100, A101, A102, X300 cell phones cable connector
4 Gnd
3 RxD
1 TxD
Panasonic G60, X100, X500 cell phone pinout14 DLPWR Remote Power ON (IN)
13 Tx_IrDA Transmit Data (OUT)
12 SDO Data Out (OUT)
11 Rx_IrDA Receive Data (OUT)
10 CTS_MODEM/SDI CTS / Data IN (IN)
9 RX_MODEM Receive Data (IN)
8 TX_MODEM Transmit Data (OUT)
7 RTS_MODEM/nSCS1 RTS / Chip select1 (OUT)
6 DSR_MODEM DSR (IN)
5 DTR_MODEM TPU in WATE Mode (IN)
4 ACC_PWR Power Supply (IN)
3 VACCID Analog Input (IN)
2 SCLK Serial Clock (OUT)
1 DGND Power Supply and Digital GROUND (GND)
Panasonic GD30, GD50, GD70, GD90 cell phones cable connector pinout
1 GND -?-
2 TX_AUDIO -?-
3 GND -?-
4 nHF_ON -?-
5 NADP_SENSE -?-
6 RX <-- SERIAL_IN
7 TX --> SERIAL_OUT
8 Non Hook -?- NON_HOOK
9 EXT_POWER -?-
10 N/C -?-
11 RX_AUDIO -?-
12 NRADIO_MUTE -?-
13 NHF_SENSE -?-
14 Vbat -?-
15 TEST SHORT (ignition) -?-
16 Logic PWR -?-
17 Pa On -?-
18 GND
Panasonic GD35 cell phone pinout
3 Rx
4 Tx
5 GND
5,6,7 batt pins
Panasonic GD55 cell phone pinout
1 Rx
2 Gnd
3 Tx
